How to Jumpstart Your Car In 6 Simple Steps

Learning how to jumpstart your car can be a lifesaver when you find yourself with a dead battery. Whether you’re at home or stranded in a parking lot, knowing how to safely jumpstart your car is an essential skill. Here’s a straightforward guide to get you back on the road quickly.

What You’ll Need to Jumpstart Your Car:

• Jumper Cables: Ensure they are in good condition and long enough to reach between vehicles.
• A Working Car: This can be another vehicle with a charged battery.
• Safety Gear: Gloves and eye protection are recommended.

How to Jumpstart Your Car: Step-by-Step Process:

1. Position the Vehicles:
   • Park the working car close to the car with the dead battery, but ensure the vehicles don’t touch. Engage both vehicles’ parking brakes and turn off the engines.
2. Connect the Jumper Cables:
   • Red Clamp to Dead Battery: Attach one end of the red (positive) jumper cable to the positive terminal of the dead battery. It usually has a “+” sign or red cover.
   • Red Clamp to Working Battery: Connect the other end of the red jumper cable to the positive terminal of the working battery.
   • Black Clamp to Working Battery: Attach the black (negative) jumper cable to the negative terminal of the working battery, marked with a “-” sign or black cover.
   • Black Clamp to Ground: Finally, connect the remaining black clamp to an unpainted metal surface on the engine block of the car with the dead battery. This helps prevent sparks near the battery.
3. Start the Working Car:
   • Turn on the engine of the working car and let it run for a few minutes. This allows the battery to charge the dead battery.
4. Start the Dead Car:
   • Attempt to start the car with the dead battery. If it doesn’t start immediately, wait a few more minutes and try to jumpstart your car again.
5. Remove the Cables:
   • Once the dead car starts, carefully remove the jumper cables in the reverse order of connection. Start with the black clamp from the grounded surface, then the black clamp from the working battery, followed by the red clamp from the working battery, and finally the red clamp from the dead battery.
6. Let the Engine Run:
   • Keep the engine running for at least 20 minutes to allow the battery to recharge sufficiently.

Safety Tips:

• Check Battery Condition: Ensure the dead battery isn’t damaged or leaking. If it is, replace it rather than jumpstarting.
• Avoid Sparks: Keep the jumper cable connections clean and avoid touching the clamps together when connected.
• Know When to Call a Professional: If the car doesn’t start after several attempts or if you suspect issues beyond the battery, contact a mechanic.

Jumpstarting your car doesn’t have to be daunting. With the right equipment and a bit of know-how, you can handle a dead battery situation confidently and get back on the road.

Related article: Top 10 Low Maintenance Cars Ever Made